Hello and Welcome to Suhlmann Today we wanna talk about the newest Firmware Update for the Eken H9. What you have to do and on which points you have to pay attention will be covered in this video! First, turn the camera on and select the settings. Scroll down until you find “Version”. Now you can see wich version of firmware is allready installed on your camera! This number is important to choose the correct firmware for the update! Download the correct firmware on the Facebook Page of the Eken H9. The Link is in the discription down below the video! There you can also ask for help or see some footage of the camera itself. On the upper right side of the page you find the “file” section! There you will find all the firmwares and some fixes if you have problems with the cam! Search for the correct FW and hit “download”! Again, which Firmware you need is set by the version of firmware who is allready installed! If you dont know it for sure just aks in this Facebook group… Now download the Firmware, unzip and safe it on an EMPTY SD card! Put the SD card in the camera slot and turn it on! The camera will turn on and goes in the flash mode! If it looks like in the video you have done everything correctly! If you got an white screen you just messed up. Go back to the facebook page and download the whitescreen fix. You have to install it similar to the firmware procedure. Now just wait and pray or play with some odd toys you find on your desk! 😉 Hello Buddies! Camera turns out? Installation finished! Good job! IMPORTANT: befor you turn on the camera again pull out the microSD with the firmware! Now you can turn it back on and check the firmware! I hope I could help you guys. Just hit the “thumbs up” button if you like. If you have question go ahead to the facebook group! *just german blabla* See you guys in the next video! Bye!