How to flash openwrt firmware to Tp-link AC1200 c50


Hello everyone! This guide how to flash openwrt firmware to AC-route This is for device version 3.0 and newer Flashing devices happens on recovery mode Connect ethernet cable to port 1 And turn off router Press Reset button on when router is switch back on and hold reset button on about 8 sec and wps light is on On computer network interface need to have static ip address After static address is set on, configure tftp / dhcp server You can use any dhcp/tftp server for this I also have added links to description Also link to firmware is in description Or here is the web site Rename firmware file to tp_recovery.bin Next start tftp – server Change tftp home folder to your firmware location After change are made start tftp/dhcp server now router can be flash Flashing takes about minute During process power light will be bling When router is ready webgui is available And login to router gui Change default root password (root) Thank you!

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2019 Geted Tabs Online. All rights reserved.