How to Increase Marg Erp in Networking LAN [English]

How to Increase Marg Erp in Networking LAN [English]


Subscribe to Marg Tutorial You Tube Channel & Press This Bell Icon So you can stay updated with latest videos Hello friends, In this video we will get to
know how you can increase networking speed in Marg Software So that your software will work fast And for this you have to focus on 4 main things SSD VS HDD RDP , Networking Speed High Configuration Server or High Gaming Machine So lets Overview to Increase Networking speed in Marg Software For this, Firstly, High Configuration or dedicated server should be there Secondly, In this SSD should be in it and third is, it should be connected through RDP Now lets know what is SSD SSD is Solid State Drive and its speed is
upto 30% fast than Hard Disk HDD transfers 50 to 150 mbps data
whereas SSD transfers 200 to 550 mbps data Hard disk is of 5400 rpm & 7200 rpm whereas SSD is of 30,000 So SSD is 3 times faster than HDD Read and write performance of SSD is approximately 20-30% higher than HDD And also the boot time of SSD is much less
than HDD If hard drive is in running state and it falls
or falls without running state Then data corruption chances are high or data can fail Whereas if SSD falls then the data in SSD
is still safe to quite an extent Along with it comparatively hard disk SSD
produces very less heat because there are moving parts in Hard Disk So whenever you access the data, those parts moves again and again through which it produce the heat whereas
there are no moving parts in SSD So it produces very less heat Normally, speed of the hard disk reaches a
half of it after 2 years That’s why we recommend you to use SSD If you want to know more about SSD then you can click on this link Next is RDP RDP stands for Remote Desktop Protocol Through it, users can access the server virtually Suppose your Marg Software is installed on
server and you use software from the different locations So you can access live server and
can work in Marg Software And if server may disconnects in between then
it will start again from there only where it was disconnected because you are working on server And if you work live then session gets generated So, if your networking breaks down then there are no chances of data corruption Because it works as sessions are made up You will get the same speed in Node means on Client PC as you get on server And if you want to know about RDP in detail
then you can visit on the given link shown on screen One thing you will focus here, Default port
3389 is not at all recommended to use Now lets understand this in detail You can see the recommended minimum configuration for server on screen and for client PC, this is the recommended configuration for client PC you can use any computer of any brand but our best recommendation is you should use thin client And advantages of thin client are It takes less space than the desktop it is cost effective like where desktop costs approx 12 to 15 thousand Client thin costs approx 6500/- Rest as it is suitable to you you can use that kind of thin client Along with it, you can easily maintain thin
client In it power consumption is less like where regular PC’s consumes 150 watt Thin client consumes average 8 to 20 watt As well as Data also remains secure because in it, there is no hard disk So, you cannot copy data in disk from the
computer You can save the data in server and cannot in another location After this, lets discuss that configuration
in detail which is recommended in Marg From the Marg Software to increase networking speed To this, we have divided it in 3 categories In which first category is If you are using 4 to 5 PC then there is no
use of high configuration server You can use any system as server and can work. Second Category is If you are using 8 to 10
systems then use seperate dedicated server and make sure in it, window 7 or 10 should
be installed This is also preferred window of the server
should be of 32 bit Third Category is, if there are 10 or more
than 10 pc then on your client PC window 7 should be installed and make sure on server,
Server window 2008 R2 should have installed On which server you are using Marg, there
server window 2012-R2 shall not be used Now we will see, what should be the Minimum Networking speed If there are 5 to 10 client PC, for that minimum 1GBPS speed is recommended Because generally the networking speed is peer to peer networking of 100 MBPS which is default MBPS and GBPS is Data Transfer Speed So if you have 10 PC and you are using speed of 100 MBPS So the speed of 100 MBPS will be divided in 10 Pcs From which data transfer speed will be slow That’s why minimum 1GBPS speed is recommended Along with it you will focus here In your Marg Software ‘RAID’ should not be configured
because due to this, speed gets slow So the alternate solution is, that you can
take an external back up like in Pendrive,Hard Disk Or you can take in 7 Layer Backup means Server Backup Now we will see, for this what kind of Networking should be there For Networking we will use 6 CAD Cable From IOPS network, connectivity in system,
you will use ready made networking patch cable Don’t use domain network there, where you are running Marg Software Because as per our Research, Domain Network slows 30% of the speed In Marg server for LAN cable connector Metal body connector or Specific connector is recommended Because if in Marg Server, for LAN cable connector
there is a use of low quality connector Then if low quality connector will start producing
heat due to which they will get loose and then networks will keep on breaking in between So, for LAN Cable connector, Metal body connector or Specific connector is recommended And cost of Metal body connector is approx 10 to 15 Rs Plastic body or Low quality connector costs approx 5-6 Rs LAN cable should be connected directly from
the server and from the direct switch As you can see here ,this is
your server and this Main LAN network is directly connected with switch Then in Sub Network
switch 1, 2, 3, LAN network is connected with switch and Client PC is connected with switch
so your connectivity should be like this To connect switch with server, don’t use
multiple switches As you can see the diagram, this is Server
and we placed one switch here then again will place this switch here Now one switch is here and here is Client PC So data 3 will pass from the switch and comes here Due to which, billing speed get slow So, that’s why do not use any medium switch for server If you want to use multiple switch for networking
then you will use fiber networking wire But if fiber cable is not available then in
that case, you can use cross cable For Local Network, you will not use Dynamic IP system You have to provide Static IP to every user
because In Dynamic IP Suppose, if you send any request to Server and PC gets disconnected with network Like if you restart your PC Then in this case, when PC gets start from network again then IP gets change From which server needs to recognize again that on which PC there was a request Due to which response time of server gets increased Along with it, in Dynamic IP connection keep on fluctuating and connection is not at all stable With it, Dynamic IP Assign Router So first request goes to Router then to Server Then whatever the Server responds, Router compile it and checks on which IP the request came up From whichever IP the request came up, router sends the request back on that IP So, in this way router has a major role in
it because you are using Dynamic IP And along with it from Server, Data takes time to reach Client PC via Server due to which speed gets slow And if Static IP has been used then there
is no need of Router So, that’s why it is recommended to use
Static IP Wireless Networking is not recommended for Marg Software If you are using Antivirus then firstly you
will exclude Marg folder Use license version for All of the Software’s in your System Because if you will use Pirated Software then system will automatically shares your information And All data from the Backend to Respective Companies As well as in Systems Various Events gets fire due to which your systems starts
working slow That’s why use license version so that you
can work error free After this, there are challenges need to be
focused If Marg Software is on RDP then in that case Bar code printer does not work in client PC If Marg Software is on RDP then in that
case DMP Printer will not print as DMP You need to use GUI Printer So Friends in this way you have learnt ‘How you can Increase Networking Speed in Marg Software’ Thank You !

3 thoughts on “How to Increase Marg Erp in Networking LAN [English]

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2019 Geted Tabs Online. All rights reserved.