How to safely update Nintendo Switch Firmware 9.0.0 and SX OS 2.9 manually using Choidujournx


Hey guys! This is UrbaxPH and for this today’s video I will be teaching you how to update the firmware into version 9.0.0 And we will also update the SX OS into Version 2.9 So please watch this video guys because there’s a bricking problem with ChoidujourNX. LETWATCH! So this is what we need: Let’s open the browser and search for “Darthsternie” On the top of the page, Look for “Switch” and click it Here, search for the firmware 9.0.0 and click that 9.0.0 Then download it using MEGA While waiting, open another tab and search for Choidujournx Which is the homebrew of switch that allows updating the firmware manually Here, download the 1.0.2 Let’s create a folder here in our desktop, we will put all of our downloaded files in this folder Let’s move choidujournx to the folder while waiting for other downloads to be finished Next, go to sx.xecuter.com Here we can download the latest sx os version 2.9 Click that As you can see it’s downloading now Then the firmware download from MEGA is completed We will move the firmware to the folder that we created on the desktop When we are done downloading these 3 We need to extract them SXOS Contains Boot.dat Then the firmware we need to extract it as “Extract Files” so that it will have a folder when it is extracted Then lastly, the Choidujournx, use extract here Delete the excess files like LICENSE, README, THIRDPARTY and the Zip files They have no use now. We only use the extracted files After that let’s move to the switch side So here in our console, we will check our Firmware version Me, i have 8.1.0 Then my sx os is version 2.8 Do not update yet to 2.9, please remain that to version 2.8 And now we turn off the console In order for us to get the SD card so we can copy the files there. If you think this video is fast, you can change it speed into 0.75 So here’s the memory We need to insert it to memory card reader, Don’t use your android phone as your card reader, the SXOS Files will be corrupted Now the PC Reads the Memory card Now let’s create a folder on the root of the MicroSD Card called: “switch” Open that folder and put the downloaded ChoiDujourNX.nro Next the firmware 9.0.0 on the root of the MicroSD Card After we copy those two, Don’t forget to close it And safely remove the memory card so that it will not be corrupted Make also sure that you backup your license.dat And now lets plug in the memory card onto the switch Then payload it and boot into SX OS CFW I use RCM LOADER in order to payload the SX Payload After it boots Lets go to the album “SX OS” MENU After that let’s go to the “HOMEBREW” Tab It’s important that your SX OS Version is 2.8 because 2.9 have issues with choidujournx Chose the downloaded 9.0.0 Click choose again and select the 9.0.0 (exfat) After that click “Select Firmware” And now we will wait for the Start Installation to show up When it shows. Click It then wait for it to finished Dont also forget the AutoRCM Must be Enabled So that we don’t burn the update Fuses and for you to have the ability to downgrade onto 8.1.0 again The installing NCAs is done Wait for it to finish. If it shows: 6/6 and 210/210, it’s now done Now we will click the reboot Don’t choose the reboot, rather choose shutdown after it was shut down, remove the MicroSd Card we will plug it again onto the PC And now the PC Reads the Memory card Now we will copy the downloaded sx os boot.dat version 2.9 We will replace the sx os boot.dat 2.8 of the sd card into the downloaded boot.dat 2.9 latest Click replace Just like that, And now don’t forget to eject the memory card safely in order for it not to be corrupted And now we plug it again onto the switch and send payload again to boot into SX OS CFW Your switch is now on autorcm mode because of the update via choidujournx. if you use RCM Jig, you can skip that Just send the payload, no rcm needed because your switch is now AUTORCM Now we will wait for it to boot into SX OS CFW I fast forwarded this step because the boot is long Now it’s booted, we will check if the firmware is updated into 9.0.0 As we can see here, it is now updated into 9.0.0 Now, we will check the SX OS Version if it’s the latest 2.9 And yes, you can see here it’s updated into version 2.9. success! Thank you guys for watching! you like this video don’t forget to Like
and subscribe to my channel thank you everyone

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2019 Geted Tabs Online. All rights reserved.