Let’s upgrade your True-D V3 firmware. First of all disassemble your module. Remove your antennas. And remove your module carefully. Remove your tape. The new True-D V3 comes with a microUSB port. No need to use an FTDI neither a usbASP… Just an USB to microUSB cable. Plug it into your computer. The module will turn itself on. And let’s go to our PC. Go to FuriousFPV webpage: www.furiousfpv.com And click the download button. Look for the XLoader for True-D V3. And just download the file. Open your browser and locate the file and extract its content. Run the file Xloader.exe as and admin. Select your custom firmware with your favourite logo. We recommend to use 57600 baudrate. Check you are using the correct COM port. (You can also take a look at your device manager). Click on Upload button and just wait for a while. A success message will appear. Your True-D module will reboot and that’s all done! Just unplug and reassemble your module to your FPV googles.