Naze32, SP Racing F3 Firmware Update Problem Cleanflight Unbrick RCeagle.com SpRacingF3

Naze32, SP Racing F3 Firmware Update Problem Cleanflight Unbrick RCeagle.com SpRacingF3


If you have problems to install the Cleanflight firmware on the Naze32 then try this guid. it worked for me. download the “Flash loader demonstrator” (link in description) click download an install the software now go on the Cleanflight website scroll down to the last stable version choose the naze32 version of the firmware and save it build a bridge, i used a paper clip, or use a jumper bypass this two connections these are the boot pins connect the flight controller via micro usb with the pc you should hear a sound check at which port the flight controller is connected open the flash loader demonstrator the flight controller is identify at port 3 click next, next, next the blue led should be on click “download to device” choose hex file select the cleanflight firmware hex file click on open click on next first it delete the old flash and then it save the new firmware at the end it should be green and a message Successful click close disconnect the flight controller from the micro usb and remove the bridge/jumper now connect the flight controller again via micro usb the green and the red led shoul blink open the Cleanflight Software on you PC click connect

Leave a Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Copyright © 2019 Geted Tabs Online. All rights reserved.